Add-On 2 Inside Panel Antenna Kit for 50 Ohm Signal Boosters | 309907-50N
Optimize your signal coverage with the Add-On 2 Internal Panel Antenna Kit, tailored for enhancing the effectiveness of a 50 ohm signal booster system. This kit is particularly valuable for structures with complex layouts such as "L" shaped buildings, or in scenarios where multiple rooms or floors are affected by thick barriers that disrupt signal flow.
Included in the kit are:
- Two Wilson 50 Ohm Full Band Panel Antennas (311135)
- One Wilson 50 Ohm 3-Way Signal Splitter (859980)
- One Wilson 2' Ultra Low Loss Coax Cable (952302)
- Two Wilson 60' Ultra Low Loss Coax Cables (952360)
Installation Steps:
1. Attach the 2-foot Ultra Low Loss Coax Cable to the internal antenna port on your amplifier. 2. Connect the 3-way splitter to the other end of this coax cable. 3. Use one of the outputs on the splitter for the coax cable and antenna that originally came with your signal booster system. 4. Connect the 60-foot coax cables and the included panel antennas to the remaining outputs.
Before finalizing the installation, it's advisable to temporarily place the antennas in their intended spots, power up the system, and assess the signal distribution throughout the building. Adjust the antenna placements to ensure all areas receive adequate signal. If you encounter any issues during installation, our technical support team is readily available to provide assistance and ensure you achieve the best possible coverage.
Original: $429.99
-65%$429.99
$150.50
Description
Optimize your signal coverage with the Add-On 2 Internal Panel Antenna Kit, tailored for enhancing the effectiveness of a 50 ohm signal booster system. This kit is particularly valuable for structures with complex layouts such as "L" shaped buildings, or in scenarios where multiple rooms or floors are affected by thick barriers that disrupt signal flow.
Included in the kit are:
- Two Wilson 50 Ohm Full Band Panel Antennas (311135)
- One Wilson 50 Ohm 3-Way Signal Splitter (859980)
- One Wilson 2' Ultra Low Loss Coax Cable (952302)
- Two Wilson 60' Ultra Low Loss Coax Cables (952360)
Installation Steps:
1. Attach the 2-foot Ultra Low Loss Coax Cable to the internal antenna port on your amplifier. 2. Connect the 3-way splitter to the other end of this coax cable. 3. Use one of the outputs on the splitter for the coax cable and antenna that originally came with your signal booster system. 4. Connect the 60-foot coax cables and the included panel antennas to the remaining outputs.
Before finalizing the installation, it's advisable to temporarily place the antennas in their intended spots, power up the system, and assess the signal distribution throughout the building. Adjust the antenna placements to ensure all areas receive adequate signal. If you encounter any issues during installation, our technical support team is readily available to provide assistance and ensure you achieve the best possible coverage.
